CAMPFIRE RINGS 118 www . b j s p a r k .com · 1-800- 3 9 2 - 6 1 5 8 • Model M-32 accessible campfire ring features a flat rear panel so wheelchairs can have closer access to the cooking grate and adjustment handles. The 300 sq. inch cooking grate adjusts to 4 levels between 19" and 24" above the ground. This design allows the grate to be adjusted one side at a time, using only one hand, and does not exceed 10 lbs. to lift. • 3/16" thick steel ring, with 1" formed flange for safety and strength. The adjustment panels are cut from 3/16" steel, and also serve as heat shields. • 300 sq. in. cooking grate is all welded 1/2" dia. steel bars supported by 5/8" dia. handle bars. 1/8" x 1/2" coiled flat steel bar handle grips. All grate bars are welded on both sides. • Finished with high temp, non-toxic black enamel paint. • Pin anchors provide a fixed location. • The ring is filled with aggregate (not included) to about 10-1/2" deep to provide the elevated fire surface. This fill also insulates the ground to reduce the chance of root fires in heavily wooded areas. Drain/ draft holes are provided around the perimeter of the ring. • Optional: Bolt on utility shelf Model S5. See Page 124. • Optional: Heat shield, welded on. See Page 124. Model M-32/17 accessible firering (Note: this installation did not require use of pin anchors). Model Inside Diameter Side Ht. Anchor Systems Cooking Area (Sq. In.) M-32/17/PA 30" 16-3/8" PA only See Page 125 300 Model Inside, Outside Diameter Side Ht. Anchor Systems Cooking Area (Sq. In.) LDW-36/18/PA 31-3/4", 36-1/2" 17-3/8" PA See Page 125 300 LDW-36/18/AL AL See Page 125 Model LDW-36/18/PA Double Wall Firering with four level adjustable grate and pin anchors. 18" high fire barrier. • Model LDW-36/18/PA accessible campfire ring features a flat rear panel so wheelchairs have closer access to the cooking grate and adjustment handles. • Accessible double-wall campfire ring Model LDW-36/18/PA includes a full-height outer ring to serve as a heat barrier for the inner ring. It also features a 300 sq. inch four level adjustable cooking grate. • 1/8" (10 ga.) outer ring with 1" formed top flange; 3/16" (7 ga.) inner ring; 17-3/8" tall fire barrier. • Three formed steel angles welded between rings form a 2" wide air space. Both rings include a series of 1" dia. (nom.) drain/draft holes. 3/16" thick steel panels support the cooking grate in four locations and help shield grate handles from heat. • 300 sq. in. cooking grate is all welded 1/2" dia. steel bars supported by 5/8" dia. handle bars. 1/8" x 1/2" coiled flat steel bar handle grips. All grate bars are welded on both sides. • Includes three anchor pins (/PA) to secure ring in place. Requires aggregate fill to raise the firebed. This firering does not have a firegrate. • Finished with high temp, non-toxic black enamel paint. • Optional: Bolt on utility shelf. See Page 124. • Optional: Spade anchors (/AL), bolt on. Requires aggregate fill to raise the firebed. ACCESSIBLE CAMPFIRE RING - M Series ACCESSIBLE CAMPFIRE RING - LDW Series
RkJQdWJsaXNoZXIy NTkzMzk=