CAMPFIRE RINGS 124 www . b j s p a r k .com · 1-800- 3 9 2 - 6 1 5 8 •This optional welded-on Heat Shield is available on select Pilot Rock campfire rings (see chart below). This welded on Heat Shield can be added to new Pilot Rock firerings to give protection from hot surfaces around the outside of the ring. The 10 ga. x 8-inch high Shield provides a 7/8-inch air gap around the area of the tall firerings exposed to heat (the lower portion of these tall rings is filled with aggregate). Any debris that gets between the ring and the Shield will fall out the open bottom. •To order a welded-on Heat Shield for your new Pilot Rock campfire ring add “/H” at the end of the model number (e.g. FS30/18/PA/H). • Optional: Bolt on utility shelf Model S5. See above. Note on accessibility: Current ADA guidelines define the space around campfire rings to provide 48" of clearance. Exceptions can reduce this clearance to 36". In these tighter clearances a Heat Shield could provide an added level of safety. Heat Shield Fits Firering Models Outside Diameter (inches) M-32/17/PA 32-11/16 FA-30/11, FA-30/18, 32-11/16 FS-30/18/PA, FS-30/24/PA, FS-30/11 32-11/16 FSW-26/18/PA 26-11/16 FX-30, FSW-30, FSW/SL-30 11", 18" and 24" tall 32-11/16 Model S5 utility shelf provides a handy place for condiments, utensils, or pots and pans. The shelf is available on most firering models and heat shields and will not interfere with grate adjustment. Constructed from 3/16" x 7-1/8" x 9-5/8" plate steel, the shelf is finished in high temperature black enamel paint. Fasteners are included. Optional Shelf Model S5 as shown on Model FA-30/18 Firering Optional Shelf Model S5 as shown on Heat Shield UTILITY SHELF - Bolts onto both Firerings and Heat Shields HEAT SHIELDS - for Added Protection from Hot Surfaces • Model FCS-1 is a specially designed shovel to clean out campfire rings. You can scoop out ashes and coals without disturbing the aggregate or ground surface beneath. The front edge of the shovel is cut to a radius to match the inside curvature of most 30-inch (nom.) inside diameter firerings. The back edge is flat so you can also clean out square corners and flat surfaces found in some firerings. The handle is hinged so you can use either edge of the shovel. It will also come in handy for cleaning out larger 48" and 56" diameter firerings. • The angle of the shovel and handle make it comfortable to use. The shovel is formed from 14 ga. steel. The 1/2" dia. steel bar handle includes our coiled steel spring grip. Finish: High temp black enamel paint. Some assembly required. CLEAN OUT SHOVEL - Model FCS-1 Model FCS-1 Firering Cleanout Shovel has one curved edge cut to match the inside radius of most 30" ID campfire rings, plus a straight edge useful for square corners and flat walls found in some ring designs. Model FCS-1 Fire ring Cleanout Shovel scoops up ashes and coals and debris from inside the ring without disturbing the base surface you want to keep under the campfire. CAMPFIRE RINGS - ACCESSORIES
RkJQdWJsaXNoZXIy NTkzMzk=