MATERIALS & COLORS 55 c ontac t@bj s par k . com · FA X : 281-356-1802 Light Green Use (TLG) in model no. Orange Use (TO) in model no. Tan Use (TT) in model no. Green Use (TN) in model no. Yellow Use (TY) in model no. Red Use (TR) in model no. GRAY Use (TA) in model no. Brown Use (TW) in model no. Blue Use (TU) in model no. Black Use (TB) in model no. Selected Pilot Rock bench, table and trash receptacle products and components featuring cut/formed steel are finished with a thermo-plastic coating in your choice of available colors. The thermo-plastic coating is PVC free and phthalate free. The UV-stabilized thermo-plastic coating is applied in a multistep process of material preparation and finish application, designed and formulated to create superior adhesion. After cleaning, the steel component is heated to 550-600 degrees (depending on the component). It is then lowered into an air-fluidized bed of colored polyethylene powder. This fluid powder fuses and bonds to the heated metal. The component is then baked at high temperature to cure the application. This dipping application provides a coating 35-40 mils thick (as much as 5x thicker than a spray-on coating). This complete process of cleaning-heating-fusing-baking tightly bonds the powder to the metal, creating a durable, colorfast finish. The thermo-plastic finish includes a superior level of UV protection, does not support mold or mildew growth, and is impact resistant. We use a textured matte finish polyethylene. These finishes are less susceptible to marring and scratching (which is often a problem with gloss finishes). Cut/formed steel components are assembled and reinforced with formed steel edge bands, angle irons and bars as appropriate to each product design. All components are single piece welded construction. Our thermocoat product has been tested by an independent lab, and given the highest rating of DNI - Does Not Ignite and does not support combustion during or after flame exposure. THERMO-PLASTIC COATED FORMED STEEL PRODUCTS STEEL STRAP AND CUT STEEL PLATE Several steel components (besides expanded and perforated steel) can also be finished with a thermoplastic coating. These different steel component designs have different Model Number designators. Each component is thermoplastic coated (/T). See the color chart below. Use “/T♦” in model number to specify color choice. Steel Material Thermo-plastic coated steel material is currently available on these products: Formed Steel Channel (SC) Most rectangular picnic tables (6' & 8'); CXB, AB, APB, and WMB Benches (6' & 8') Steel Strap (SS) CN-R/SS3-36 trash receptacle; P-23 Planter Cut Steel Plate (SP) B70 and B120 benches; T Series round tables, CN-R/SP2-32 trash receptacle Other Steel Products BR20 bike rack; HRP and HRE bike racks; CN-EXP52 park policeman FORMED STEEL CHANNEL - Looks like 2x4 lumber. Has the strength of steel. Formed steel channel (SC) components approximate 2" x 4" lumber dimensions, but are formedusing 16 ga. steel plate with 16 ga. bracing. These tops and seats are strong and light weight. Formed steel channels (SC), steel end caps and understructure bracing are pre-assembled at the factory for easier onsite assembly. After assembly each component is thermoplastic coated (/T). See the color chart below. Use “/T♦” in model number to specify color choice. Example for Steel Strap, Steel Channel, Steel Plate products: B122/CB-4SP/♦ Replace (♦) with letters indicating type and color listed under sample. Note: Colors and textures may vary. Colors shown are as close to the actual colors as the printing process is able to reproduce them. When selecting colors, keep in mind that Thermo-plastic Coating, Powder Coating and Recycled Plastic may not be exactly the same color -- i.e., Blue Thermo-plastic Coating for seats and/or table tops and Blue Powder Coating for frames may differ slightly.
RkJQdWJsaXNoZXIy NTkzMzk=