81 c ontac t@bj s par k . com · F A X : 281-356-1802 SITE AMENITIES BPFL TRAIL SIDE LOCKER BPFL-D FOOD LOCKER WITH CENTER WALL BPFL EMBEDDED POST MOUNT Optional installation method for BPFL Food Lockers • Optional: Model BPFL-30 food locker can be equipped with a center dividing wall which creates two equal 15 cu. ft. compartments, creating Model BPFL-D-30. • Each compartment has its own door with latch and two latch points. • Each door can be padlocked closed separately. Padlock not included. • Optional: “Food Storage” decal #DE-36/2. Model BPFL-D/CTT-30 Bear Resistant Food Locker, with center dividing wall, textured speckled tan powder coat paint finish, two individual 15 cu. ft. compartments. • Alternate Installation for BPFL Food Lockers • If you don’t have a concrete pad to anchor your Food Lockers to, this embedded post installation offers you an alternative. • 3-1/2 in. OD x 61-1/4 in. long post is embedded into a concrete footing (min. recommended 12 in. dia. x 36 in. deep). • The center back of the Food Locker is attached to this post. • All hardware is included. • The ground surface should be as level as possible. • Black paint finish on post. • NOTE: This installation method has not been tested/certified by the IGBC. • Not available for the BPFL-T-18 Trail Side Locker. Model BPFL/CB-POST1 alternate food locker installation method. • Model BPFL-T-18 provides smaller lockers to temporarily store food and other gear you don’t want to carry while hiking the trails. • Two compartments per unit. Each compartment provides 9 cu. ft. of storage (20" H x 25-1/4" W x 321/4" D) for a total of 18 cu. ft. – large enough to hold backpacks, small coolers and other gear. • Individual wide-swing doors with full-length stainless steel piano hinge. Doors measure 18 in. x 21-1/2 in. for easy access. • One hand operation to open doors. The latch cover prevents access for bears. • Each compartment door has its own latch and can be padlocked closed (padlock not included). • Includes support bases (bolt-on) with leveling feet to adjust for an uneven surface. Each adjustable “foot” has a ¾” x 2” slot to accommodate different surface conditions and positions for anchoring. Optional Food Storage Locker Decal #DE-36/2 can be used with all BPFL Series lockers. Decal measures approx. 5" x 6". Black on white vinyl KEEP LOCKER CLOSED AT ALL TIMES Help Protect Yourself and Our Bears FOOD STORAGE USE THIS LOCKER FOR: •FOOD & DRINKS Including unopened cans and bottles •ICE CHESTS •TEMPORARY GEAR STORAGE Backpacks, rain gear, misc. equipment •TOILETRIES & SCENTED ITEMS Such as toothpaste, soap, wipes, sunscreens, lotions, etc. Please remove all trash and recycling to a bear-proof receptacle. DE-36/2 DE-36/2 Model BPFL-T/CTT-18 Bear Resistant Trail Side Locker with textured speckled tan powder coat finish, two 9 cu. ft. compartments. Model BPFL-T/CWT-18 lockers can be mounted side-by-side with included fasteners. •Locker top, sides, floor and door panels are fabricated using heavy 12 ga. steel plate. • The bottom compartment floor is 18" above the ground surface and meets the ADA guidelines for reach and operability. • Includes a set of (4) 1/2" x 5" concrete screw anchors (#ANC5-4). • Additional 2-compartment lockers can be bolted together sideby-side to create an array of lockers to accommodate your unique requirements. Fasteners included. •Textured powder coat paint finish is available in five colors: brown (/CWT), green (/CNT), black (/CBT), blue (/CUT), speckled tan (/CTT). See Page 53. • Optional: “Food Storage” decal #DE-36/2.
RkJQdWJsaXNoZXIy NTkzMzk=