86 www . b j s p a r k .com · 1-800- 3 9 2 - 6 1 5 8 SITE AMENITIES CONDIMENT SERVING TABLE •Model CST is designed as a concession area table to serve up condiments, utensils and supplies. This allows your concession stand customers to step away from the serving window to prepare their purchase to their own tastes. • Support posts are 2-3/8” OD steel pipe with a welded on base plate of 1/4 in. x 8 in. steel plate with four 3/4 in. dia. holes. • Standard: Surface mount/bolt down installation (anchor bolts not included). • Standard frame finish: hot dip galvanized after fabrication. • Optional frame finish: powder coating in choice of colors. See Page 52. • Table top is 2-1/2 in. x 12 in. wide (nom.) 12 ga. perforated steel with integrated edge banding and 10 ga. internal mounting angles. Top is thermo-plastic coated in choice of colors. See Page 57. • Height: 46 inches from ground surface to table top. • Length: 4, 6, 8 or 10 feet long (10 ft. table has three posts). • Optional: Surface mount anchor kit #ANC5-4. Use one kit per post. See Page 126. • Optional: Longer posts (no base plate) for embedded installation into concrete footings. Model CST/P/CB-6HY12 Condiment Serving Table, black powder coated frames with bolt-down base plate option, 6 ft. long, thermo-coated perforated steel top in yellow. MARKSMAN SHOOTING TABLE - MST-1 Series • A durable marksman table for outdoor shooting ranges and gun clubs, designed by experienced marksmen. • Two installation options: Model MST-1R offers embedded post installation into concrete footings. Model MST/P-1R includes welded on base plates on each frame leg for a surface mount/bolt down installation. The welded on base plates are 1/4 in. x 8 in. x 8 in. square with (4) 25/32 in. diameter holes. Anchor bolts not included. See Page 126. Use (3) #ANC5-4 anchor kits. • Table top and swivel seat are fabricated using 14 ga. perforated steel with 2-1/2 in. wide edge band with supporting 14 ga. reinforcements. Mounting brackets are formed using 7 ga. steel. Top and seat components are thermo-plastic coated in your color choice. See Page 57. • Top Dimensions: Table top is 34 in. wide by 48 in. deep. Installed height is 55-1/2 in. to top of table (all dimensions nominal). Model MST/P/CB-1RN Marksman Shooting Table, black powder coated frames with optional bolt-down base plate, thermo-coated perforated steel top/seats in green. The swivel seat accomodates both left- and right-handed users. 48 34 18 7/16 • Seat Dimensions: Swivel seat is 16 in. diameter. Once installed on the support post the swivel seat cannot be removed. The seat offers six 1-inch height adjustment options from 20-1/4 in. to 25-1/4 in. (nom.) using a locking pin. • The twin radius-cut table top design and the swivel seat are designed to accommodate left-handed and right-handed shooters. • The top is supported by a tripod using two 2-3/8 in. OD steel pipe posts and one 3-1/2 in. OD post. The swivel seat is installed on the 3-1/2 in. post. The swivel seat arm is a welded assembly of 7 ga. steel and 4-inch OD steel tube. • Standard: Hot dip galvanized finish on frame components after fabrication for maximum protection from the elements. • Optional: Powder coated frame finish in your color choice. See Page 52.
RkJQdWJsaXNoZXIy NTkzMzk=